Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000003GRW000X
Title: EXTERIOR PANELS / TRIM: REAR DOOR BELT MOULDING: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the RH side and LH side.
  • The procedure described below is for the LH side.

1. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING EXTERIOR PANELS / TRIM: REAR DOOR WINDOW FRAME MOULDING: REMOVAL (2008 Sequoia)+

2. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP



(a) Apply protective tape to the door panel in the area around the rear door glass outer weatherstrip.

(b) Using a moulding remover, disengage the 5 claws and the clip and remove the rear door glass outer weatherstrip.